3D Printing InfoPrinter comparison
Anycubic Kobra 2 vs Raise3D Pro3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 comparisonsMore Raise3D Pro3 comparisons
| Property | Anycubic Kobra 2BEDSLINGER | Raise3D Pro3IDEX |
|---|---|---|
| Identity | ||
| Brand | Anycubic | Raise3D |
| Class | BEDSLINGER | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2[1] | Raise3D Pro3 3D Printer[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 15 May 2023 (Shopify publish date)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $169.00 on store.anycubic.com, Aug 2026, against a compare-at price of $279.00 - the cheapest machine in this file[1] | $2,999.00 on Raise3D's own store, available, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base model of a five-way family that is easy to confuse. All of Kobra 2, Kobra 2 Neo and Kobra 2 Pro share the same 220 x 220 x 250 mm build volume, but their speed ceilings differ: Neo 250 mm/s max / 150 typical, Kobra 2 300 / 200, Kobra 2 Pro 500 / 300. The Plus (320 x 320 x 400 mm) and Max (420 x 420 x 500 mm) are bigger but drop the bed ceiling to 90 C where the three small ones reach 110 C. Anycubic's own note: Kobra 2 firmware must be at V3.0.6 or above for the quoted speed[1][4][5][6][7] | A crowded family with materially different prices: Pro3 $2,999, Pro3 Hyper Speed Package $4,999, Pro3 HS $4,599, Pro3 Plus HS $6,099. Build volume also changes with head count: 300 x 300 x 300 mm single-head, 255 x 300 x 300 mm dual-head. Raise3D's smaller E-series (E2 $1,999, E2CF $2,499, E3 $2,499) and the resin DF2 line are separate machines entirely[3][8][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm in X x Y x Z; Anycubic quotes 12.1 L[1] | 300 x 300 x 300 mm with one extruder; 255 x 300 x 300 mm with both[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 486 x 440 x 435 mm stated as HWD, so the desk footprint is about 440 x 435 mm and the height is 486 mm[1] | 620 x 626 x 760 mm[2] |
| Net weight (kg) | 8.4 kg[1] | 52.5 kg net[2] |
| Frame construction & material | Not documented | Fully assembled enclosed professional chassis[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed with a HEPA and activated-charcoal filter[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame; Anycubic describes double metal spindles with SG15 bearings on the moving axes[1] | Dual-head with an electronic lifting system[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double-threaded rod Z axis (dual lead screws)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 300 mm/s maximum print speed (Anycubic Lab figure; firmware V3.0.6 or above required)[1] | Not documented |
| Recommended/typical print speed | 200 mm/s recommended print speed (manufacturer figure) - the number to plan around, not the 300 mm/s headline[1] | Not documented |
| Max travel speed | Not documented | Print-head travel speed 30-150 mm/s (manufacturer figure)[2] |
| Max acceleration (claimed, mm/s²) | 3000 mm/s2 acceleration (manufacturer figure) - modest next to the 20000 mm/s2 of the current Kobra generation[1][9] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a dual-geared extrusion structure[1] | Dual print heads, 1.75 mm filament[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | 300 °C maximum nozzle temperature[2] |
| Heater cartridge power (W) | 60 W hotend heater (Anycubic states "upgraded extruder power reaches up to 60 watts")[1] | Not documented |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.2, 0.6, 0.8 and 1.0 mm available[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | 120 °C maximum build-plate temperature, silicone heater[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible steel plate with BuildTak[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with smart Z-offset and a user-adjustable Z compensation value[1] | Mesh levelling with flatness detection[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted, with power-loss recovery[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan rated to 7000 rpm (Anycubic figure)[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | HEPA filter with activated charcoal[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Motion controller Atmel ARM Cortex-M4 at 120 MHz with FPU; logic controller NXP ARM Cortex-A9 quad-core at 1 GHz[2] |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | 1 GB RAM, 8 GB onboard flash, embedded Linux[2] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 V AC, 50/60 Hz input; 24 V DC, 600 W output[2] |
| Total rated power draw | Not documented | 600 W output[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Embedded Linux on the logic controller; slicing is ideaMaker. Firmware base not published[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | 7-inch touchscreen, 1024 x 600[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | microSD card[1] | Wi-Fi, Ethernet, USB 2.0 x2; live camera[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Live camera fitted; resolution not published[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular assembly - Anycubic states 5 pieces in about 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU[1] | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, nylon, composites and metal/wood-filled grades[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 55 dB(A) while printing, manufacturer figure. No independent measurement; distance and method not stated[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[10] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | XYZ step size 0.78125 / 0.78125 / 0.078125 micron (manufacturer specification, not an accuracy measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Raise3D Pro3 3D Printer listing matterhackers.com · 2026-08 · vendor
- Raise3D 3D-printer collection product feed (live prices) shop.raise3d.com · 2026-08 · vendor
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Raise3D E2 3D Printer product page shop.raise3d.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor