3D Printing InfoPrinter comparison
Anycubic Kobra 2 vs FlashForge Creator 5 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 comparisonsMore FlashForge Creator 5 Pro comparisons
| Property | Anycubic Kobra 2BEDSLINGER | FlashForge Creator 5 ProTOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Anycubic | FlashForge |
| Class | BEDSLINGER | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2[1] | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 15 May 2023 (Shopify publish date)[1] | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[4][5] |
| Launch MSRP (USD) | Not documented | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[4][5] |
| Street price (USD; dated snapshot per entry) | $169.00 on store.anycubic.com, Aug 2026, against a compare-at price of $279.00 - the cheapest machine in this file[1] | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base model of a five-way family that is easy to confuse. All of Kobra 2, Kobra 2 Neo and Kobra 2 Pro share the same 220 x 220 x 250 mm build volume, but their speed ceilings differ: Neo 250 mm/s max / 150 typical, Kobra 2 300 / 200, Kobra 2 Pro 500 / 300. The Plus (320 x 320 x 400 mm) and Max (420 x 420 x 500 mm) are bigger but drop the bed ceiling to 90 C where the three small ones reach 110 C. Anycubic's own note: Kobra 2 firmware must be at V3.0.6 or above for the quoted speed[1][6][7][8][9] | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[2][4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm in X x Y x Z; Anycubic quotes 12.1 L[1] | 256 x 256 x 256 mm[4][5][10] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 486 x 440 x 435 mm stated as HWD, so the desk footprint is about 440 x 435 mm and the height is 486 mm[1] | Not documented |
| Net weight (kg) | 8.4 kg[1] | Not documented |
| Frame construction & material | Not documented | Rigid frame with a fully sealed enclosure; no dimensions or weight published[2][5] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[2][4][5] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[2][4][5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame; Anycubic describes double metal spindles with SG15 bearings on the moving axes[1] | CoreXY with four independent FlashSwap toolheads[4][5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double-threaded rod Z axis (dual lead screws)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 300 mm/s maximum print speed (Anycubic Lab figure; firmware V3.0.6 or above required)[1] | 600 mm/s maximum (manufacturer claim)[2][4][5] |
| Recommended/typical print speed | 200 mm/s recommended print speed (manufacturer figure) - the number to plan around, not the 300 mm/s headline[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 3000 mm/s2 acceleration (manufacturer figure) - modest next to the 20000 mm/s2 of the current Kobra generation[1][11] | 30,000 mm/s2 maximum (manufacturer claim)[4][5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a dual-geared extrusion structure[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | Not documented |
| Heater cartridge power (W) | 60 W hotend heater (Anycubic states "upgraded extruder power reaches up to 60 watts")[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel nozzles as standard[4][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | 120 °C maximum (manufacturer claim)[5] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with smart Z-offset and a user-adjustable Z compensation value[1] | Fully automatic calibration and levelling; probe technology not named[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted, with power-loss recovery[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Not documented | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[2][4] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan rated to 7000 rpm (Anycubic figure)[1] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[2][4][5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | microSD card[1] | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[4][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | 1080p camera at 30 fps[4][5] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular assembly - Anycubic states 5 pieces in about 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[12] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor