3D Printing InfoPrinter comparison
Anycubic Kobra 2 vs FlashForge Creator 4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 comparisonsMore FlashForge Creator 4 comparisons
| Property | Anycubic Kobra 2BEDSLINGER | FlashForge Creator 4IDEX |
|---|---|---|
| Identity | ||
| Brand | Anycubic | FlashForge |
| Class | BEDSLINGER | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2[1] | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[2] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 15 May 2023 (Shopify publish date)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $169.00 on store.anycubic.com, Aug 2026, against a compare-at price of $279.00 - the cheapest machine in this file[1] | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base model of a five-way family that is easy to confuse. All of Kobra 2, Kobra 2 Neo and Kobra 2 Pro share the same 220 x 220 x 250 mm build volume, but their speed ceilings differ: Neo 250 mm/s max / 150 typical, Kobra 2 300 / 200, Kobra 2 Pro 500 / 300. The Plus (320 x 320 x 400 mm) and Max (420 x 420 x 500 mm) are bigger but drop the bed ceiling to 90 C where the three small ones reach 110 C. Anycubic's own note: Kobra 2 firmware must be at V3.0.6 or above for the quoted speed[1][3][4][5][6] | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm in X x Y x Z; Anycubic quotes 12.1 L[1] | 400 x 350 x 500 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 486 x 440 x 435 mm stated as HWD, so the desk footprint is about 440 x 435 mm and the height is 486 mm[1] | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[2] |
| Net weight (kg) | 8.4 kg[1] | 90 kg net[2] |
| Frame construction & material | Not documented | Fully enclosed professional chassis on a stand[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 65 °C, actively controlled (manufacturer claim)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame; Anycubic describes double metal spindles with SG15 bearings on the moving axes[1] | IDEX — two independently driven extruders on the same gantry[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double-threaded rod Z axis (dual lead screws)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 300 mm/s maximum print speed (Anycubic Lab figure; firmware V3.0.6 or above required)[1] | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[2] |
| Recommended/typical print speed | 200 mm/s recommended print speed (manufacturer figure) - the number to plan around, not the 300 mm/s headline[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 3000 mm/s2 acceleration (manufacturer figure) - modest next to the 20000 mm/s2 of the current Kobra generation[1][7] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with a dual-geared extrusion structure[1] | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[2] |
| Heater cartridge power (W) | 60 W hotend heater (Anycubic states "upgraded extruder power reaches up to 60 watts")[1] | Not documented |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm default; 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | 130 °C maximum (manufacturer claim)[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with smart Z-offset and a user-adjustable Z compensation value[1] | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted, with power-loss recovery[1] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Two spool bays, 1 kg and 2 kg capacity[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Part-cooling fan rated to 7000 rpm (Anycubic figure)[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[2] |
| Total rated power draw | Not documented | 2320 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named; the supported slicer is FlashPrint[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | 7-inch touchscreen, 1024 x 600[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | microSD card[1] | USB flash drive, Ethernet, Wi-Fi[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Modular assembly - Anycubic states 5 pieces in about 10 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU[1] | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[8] | 12 months on the printer, 3 months on extruder parts[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor