3D Printing InfoPrinter comparison
Anycubic Kobra 2 Neo vs QIDI X-Max 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Anycubic Kobra 2 Neo comparisonsMore QIDI X-Max 3 comparisons
| Property | Anycubic Kobra 2 NeoBEDSLINGER | QIDI X-Max 3COREXY |
|---|---|---|
| Identity | ||
| Brand | Anycubic | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Anycubic Kobra 2 Neo[1] | QIDI X-Max 3, listed by QIDI as "Qidi Tech X-Max 3 3D Printer" and in navigation as X-Max3[2][3] |
| Release date (announcement and actual shipping) | Listed on the Anycubic store from 31 August 2023 (Shopify publish date), the same day as the Kobra 2 Plus and Kobra 2 Max[1][4][5] | Not published by QIDI; the product page carries a discontinuation notice rather than a launch date (checked Aug 2026)[2] |
| Street price (USD; dated snapshot per entry) | $249.00 on store.anycubic.com, Aug 2026 - higher than the better-specified Kobra 2 at $169 on the same day, which is a listing quirk rather than a positioning statement[1][6] | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock[2][7] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Lowest model of the Kobra 2 family. Same 220 x 220 x 250 mm build volume as the Kobra 2 and Kobra 2 Pro but the slowest of the three (250 mm/s max, 150 mm/s typical against 300/200 and 500/300), and the only one with a 2.4-inch knob-driven screen instead of a 4.3-inch touchscreen[1][6][8] | Same-generation siblings X-Plus 3 (280x280x270, 500 mm/s, 800 W) and X-Smart 3 (175x180x170, no chamber heating, 300 °C, 350 W). All three share the Cortex-A53 1.5 GHz / 1 GB DDR3 / 8 GB eMMC control board, so shared-board specs are not evidence of shared print specs. Replaced by the Max4[3][9][10][11] |
| Market position: superseded? successor announced? | Not documented | Discontinued and out of production; QIDI directs buyers to the Max4[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 250 x 220 x 220 mm stated HWD, i.e. 220 x 220 x 250 mm; 12.1 L[1] | 325 x 325 x 315 mm advertised[2][3][7] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 485 x 440 x 440 mm stated HWD - footprint about 440 x 440 mm[1] | 553 x 553 x 601 mm[3][7] |
| Net weight (kg) | 7.3 kg[1] | 30.2 kg net[3][7] |
| Frame construction & material | Not documented | Enclosed CoreXY chassis, fully assembled from the factory. QIDI does not publish a frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed, with a chamber circulation blower and activated-carbon air filter[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C maximum, independent chamber heating (manufacturer claim)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bed-slinger with a gantry frame structure built from 5 modules[1] | CoreXY[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear optical axis (polished steel rod) of high-strength steel[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Double Z axis[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s maximum print speed (Anycubic Lab figure)[1] | <=600 mm/s (manufacturer claim)[2][3][7] |
| Recommended/typical print speed | 150 mm/s recommended print speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 35 mm3/s extruder flow (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Integrated direct extruder[1] | High-flow direct-drive extruder; QIDI states a 9.5:1 gear ratio for this model[2][3] |
| Gear ratio & drive gear material | Not documented | 9.5:1[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating core. Two interchangeable nozzle-head sets shipped: copper alloy for standard materials, hardened steel for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 C nozzle temperature ceiling; 0.4 mm replaceable nozzle[1] | <=350 °C claimed[2][3][7] |
| Heater cartridge power (W) | 60 W hot end (manufacturer figure)[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 C hotbed temperature ceiling[1] | <=120 °C claimed[3][7] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided flexible magnetic plate (QIDI's "HF" plate)[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Anycubic LeviQ 2.0 automatic levelling with intelligent Z-offset compensation[1] | Automatic levelling via Klipper adaptive meshing; probe technology not named by QIDI[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection fitted; type and location not published[3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | 7000 rpm cooling fan (manufacturer figure)[1] | Not documented |
| Auxiliary part-cooling fan? | Not documented | Additional (auxiliary) cooling fan fitted[3] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Chamber circulation blower with activated-carbon air filter[3] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[2][3] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[3] |
| Total rated power draw | Not documented | 900 W rated[3][7] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin - Anycubic states it applies "linear propulsion and input shaping functions in Marlin firmware", which makes this one of the few Anycubic machines with a named firmware base rather than the later Kobra OS branding[1][12] | Klipper with the Fluidd web console. Fork and version not published[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 2.4-inch LCD knob screen - not a touchscreen[1] | 5-inch touchscreen, 800 x 480[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Knob-driven UI, redesigned by Anycubic for the Kobra 2 generation[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi (QIDI states 150M 2.4G), Ethernet, USB flash drive[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Five modules with a gantry frame design, described by Anycubic as easy assembly and low maintenance[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, PETG, TPU (Kobra 2 family list)[6] | ABS, PLA, PETG, TPU, nylon, carbon fibre, PC[7] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | One year on the complete machine (excluding gifted and second-hand machines), with component warranty periods that vary by part; the period starts on the delivery date and is suspended while a replacement is in transit. Anycubic states it will follow longer local statutory periods where they apply[13] | 1-year coverage[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Anycubic Kobra 2 Neo store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Anycubic Kobra 2 Plus store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 Max store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Anycubic Kobra 2 store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- Qidi Tech X-Max 3 FDM 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Anycubic Kobra 2 Pro store page and Shopify product JSON (Tech Specs block, price, store publish date) store.anycubic.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Anycubic Kobra 4 product page (Specifications table) store.anycubic.com · 2026-08 · vendor
- Anycubic refund and warranty policy store.anycubic.com · 2026-08 · vendor