3D Printing InfoPrinter comparison
AnkerMake M5C vs Snapmaker U1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5C comparisonsMore Snapmaker U1 comparisons
| Property | AnkerMake M5CBEDSLINGER | Snapmaker U1TOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | Snapmaker |
| Class | BEDSLINGER | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5C. AnkerMake has since been rebranded eufyMake[1][2] | Snapmaker U1 3D Printer[3] |
| Street price (USD; dated snapshot per entry) | $399 as stated on eufyMake's own M5C write-up, checked Aug 2026; that page is a buying guide rather than a live cart listing. 3DJake shows the machine sold out and no longer stocked[2][1] | $849.00 against a $999.00 compare-at price on us.snapmaker.com, but the listing is marked Unavailable, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Cheaper counterpart to the M5. It is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s), and drops the 4.3-inch screen, the camera and AI recognition entirely — control is via the app plus a single one-click button. The 500 mm/s figure is a fast-mode claim; the default is 250 mm/s[1][2][4] | An optional top cover changes what the machine can print: without it PLA/PETG/TPU/PVA/PCTG; with it ABS, ASA, PA, PC and PET are added; with the top cover AND a hardened-steel nozzle, carbon- and glass-fibre grades. A stated material list for the U1 is therefore meaningless without saying which configuration it refers to[3] |
| Market position: superseded? successor announced? | 3DJake lists it as sold out and no longer stocked; the brand is now eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[1][2] | 270 x 270 x 270 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 584 x 499 x 730 mm[3] |
| Net weight (kg) | Not documented | 18.2 kg[3] |
| Frame construction & material | Die-cast aluminium-alloy base; eufyMake describes the Z axis as aerospace-grade aluminium alloy[2] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Open as sold; a top cover is an optional accessory that raises the supported material range[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger with a single Y-axis belt[1] | Four independent toolheads on a changer; Snapmaker quotes a 5-second swap[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1][2] | 500 mm/s maximum toolhead speed (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | 20,000 mm/s2 maximum (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | 35 mm3/s (manufacturer claim)[2] | 32 mm3/s maximum hotend flow (manufacturer claim)[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaping with an accelerometer, run as a calibration routine[3] |
| Extrusion Pressure Control | ||
| Pressure advance (Klipper) / linear advance (Marlin) supported? | Not documented | Pressure advance, with automatic flow compensation calibration[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend[2] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Up to 300 °C (manufacturer claim)[2] | 300 °C maximum (manufacturer claim)[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Stainless steel as standard; hardened steel needed for fibre-filled grades[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 °C maximum (manufacturer claim)[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible steel sheet with a PEI surface[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 49-point (7 x 7) automatic bed levelling; probe technology not named[2] | Mesh bed levelling. Automatic toolhead offset calibration is done by coordinate measuring[3] |
| Mesh grid size (probe point count — firmware evidence) | 49 points[2] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out detection, plus air-printing detection and RFID filament recognition[3] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Four toolheads with auto-feed and a backup mode; toolhead swap error detection, build-plate presence and obstruction detection[3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Main plus auxiliary part-cooling fans[3] |
| Electronics & Power | ||
| Total rated power draw | Not documented | Maximum input power 1150 W at 220-240 V, 400 W at 100-120 V; maximum input current 6 A / 4 A respectively[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | None. 3DJake's table records "Printer display: None" and eufyMake confirms there is no screen[1][2] | 3.5-inch, 320 x 480 touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi; eufyMake also cites Bluetooth for app pairing[1][2] | Wi-Fi 2.4 GHz (802.11b/g/n) and USB flash drive. No Ethernet listed[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | None. No camera and no AI recognition on this model[1][2] | 2 MP built-in chamber camera for live view[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[3] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG and others; eufyMake does not publish a closed list[2] | Base: PLA, PETG, TPU, PVA, PCTG. With the optional top cover: adds PET, ABS, ASA, PA, PC. With top cover and a hardened-steel nozzle: adds carbon- and glass-fibre-reinforced polymers[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print precision quoted at +/-0.1 mm (manufacturer specification, not an independent measurement)[1][2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- Snapmaker U1 product page us.snapmaker.com · 2026-08 · vendor
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor