3D Printing InfoPrinter comparison
AnkerMake M5C vs QIDI X-Smart 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5C comparisonsMore QIDI X-Smart 3 comparisons
| Property | AnkerMake M5CBEDSLINGER | QIDI X-Smart 3COREXY |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5C. AnkerMake has since been rebranded eufyMake[1][2] | QIDI X-Smart 3, listed in QIDI navigation as X-Smart3[3][4] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI on the pages checked (Aug 2026)[3][4] |
| Street price (USD; dated snapshot per entry) | $399 as stated on eufyMake's own M5C write-up, checked Aug 2026; that page is a buying guide rather than a live cart listing. 3DJake shows the machine sold out and no longer stocked[2][1] | $399 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Cheaper counterpart to the M5. It is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s), and drops the 4.3-inch screen, the camera and AI recognition entirely — control is via the app plus a single one-click button. The 500 mm/s figure is a fast-mode claim; the default is 250 mm/s[1][2][5] | Entry model of the 3-series. Unlike the X-Plus 3 and X-Max 3 it has no heated chamber, a 300 °C rather than 350 °C hotend, a brass rather than copper-alloy/hardened-steel nozzle head, and no Ethernet. It shares the Cortex-A53 board with them, so control-board specs must not be read as shared print specs[3][6][7] |
| Market position: superseded? successor announced? | 3DJake lists it as sold out and no longer stocked; the brand is now eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[1][2] | 175 x 180 x 170 mm advertised[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 370 x 362 x 397 mm[3] |
| Net weight (kg) | Not documented | 10.5 kg[3] |
| Frame construction & material | Die-cast aluminium-alloy base; eufyMake describes the Z axis as aerospace-grade aluminium alloy[2] | QIDI publishes no frame-material breakdown for this model[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | No heated chamber. 3DJake's table records "Heated chamber: No"; QIDI does not describe an enclosure for this model[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger with a single Y-axis belt[1] | CoreXY[3][4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1][2] | <=500 mm/s (manufacturer claim)[3][4] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | 20,000 mm/s2 (manufacturer claim)[4] |
| Max volumetric flow claimed (mm³/s) | 35 mm3/s (manufacturer claim)[2] | 30 mm3/s extruder flow (manufacturer claim)[3][4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Direct-drive extruder, single, 1.75 mm filament[3][4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend[2] | Brass nozzle head. 0.4 mm stock, 0.2/0.6/0.8 mm optional[3][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Up to 300 °C (manufacturer claim)[2] | <=300 °C claimed[3][4] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed[3][4] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided flexible magnetic RF plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 49-point (7 x 7) automatic bed levelling; probe technology not named[2] | 16-point automatic bed levelling per QIDI's US page; probe technology not named[4] |
| Mesh grid size (probe point count — firmware evidence) | 49 points[2] | 16 points (QIDI's US page). Not verified against firmware[4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection fitted; type and location not published[3] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[3] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[3] |
| Total rated power draw | Not documented | 350 W rated[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | None. 3DJake's table records "Printer display: None" and eufyMake confirms there is no screen[1][2] | 4.3-inch touchscreen[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi; eufyMake also cites Bluetooth for app pairing[1][2] | Wi-Fi and USB. No Ethernet listed for this model[3][4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | None. No camera and no AI recognition on this model[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG and others; eufyMake does not publish a closed list[2] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage (QIDI standard store terms)[8] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print precision quoted at +/-0.1 mm (manufacturer specification, not an independent measurement)[1][2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Smart 3 official US page qidiusa.com · 2026-08 · vendor
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor