3D Printing InfoPrinter comparison
AnkerMake M5C vs Bambu Lab A2L
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5C comparisonsMore Bambu Lab A2L comparisons
| Property | AnkerMake M5CBEDSLINGER | Bambu Lab A2LBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | Bambu Lab |
| Class | BEDSLINGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5C. AnkerMake has since been rebranded eufyMake[1][2] | Bambu Lab A2L[3] |
| Release date (announcement and actual shipping) | Not documented | Pre-orders opened 1 June 2026 (Tom's Hardware spec box); Tom's Hardware review published 27 June 2026[4] |
| Launch MSRP (USD) | Not documented | $469 standalone, $569 Combo at launch[4] |
| Street price (USD; dated snapshot per entry) | $399 as stated on eufyMake's own M5C write-up, checked Aug 2026; that page is a buying guide rather than a live cart listing. 3DJake shows the machine sold out and no longer stocked[2][1] | From $469.00 on the Bambu Lab US store, Aug 2026[5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Cheaper counterpart to the M5. It is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s), and drops the 4.3-inch screen, the camera and AI recognition entirely — control is via the app plus a single one-click button. The 500 mm/s figure is a fast-mode claim; the default is 250 mm/s[1][2][6] | Standalone and Combo (with AMS lite) SKUs, and an optional cutting/drawing module (blade cutter and pen plotter, 300x300 mm cutting area) that is a separate attachment, not a printer variant. Do not carry A1 or A1 mini figures across: the A2L is a different, much larger machine at 12.8 kg[3][4] |
| Market position: superseded? successor announced? | 3DJake lists it as sold out and no longer stocked; the brand is now eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm[1][2] | 330 x 320 x 325 mm (manufacturer figure)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 544 x 529 x 505 mm[3] |
| Net weight (kg) | Not documented | 12.8 kg net[3] |
| Frame construction & material | Die-cast aluminium-alloy base; eufyMake describes the Z axis as aerospace-grade aluminium alloy[2] | Aluminium and steel chassis with a plastic outer frame; Tom's Hardware describes a triangular gantry frame the base drops into[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger with a single Y-axis belt[1] | Cartesian bed-slinger - Tom's Hardware's assembly description has the heatbed bolting to a Y-carriage inside the gantry frame[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Not published in the spec sheet; no teardown source found that documents the Z drive[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1][2] | 500 mm/s max toolhead speed (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | 10 m/s2 = 10000 mm/s2 max toolhead acceleration (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | 35 mm3/s (manufacturer claim)[2] | 28 mm3/s claimed, measured by Bambu on a 150 mm round single-wall model in Bambu PLA Basic at 220 C - note this test uses PLA, unlike the ABS-based figures Bambu quotes for its enclosed machines, so it is not directly comparable[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Direct drive with a servo extruder motor and hardened-steel extruder gears; built-in filament cutter[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend[2] | Stainless-steel nozzle; 0.2/0.4/0.6/0.8 mm supported. Bambu's A2L sheet does not state whether the hotend is all-metal[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Up to 300 °C (manufacturer claim)[2] | 300 C claimed max nozzle temperature[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 80 C max heatbed temperature[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Textured PEI plate included; Engineering Plate and Cool Plate SuperTack also supported[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 49-point (7 x 7) automatic bed levelling; probe technology not named[2] | Automatic bed levelling with automatic Z: Tom's Hardware confirms the nozzle is used as the probe and the machine can re-check level before each print[4] |
| Mesh grid size (probe point count — firmware evidence) | 49 points[2] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Yes - run-out sensor, filament odometry, tangle sensor and clumping detection[3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Part-cooling fan and hotend cooling fan, both closed-loop controlled. No auxiliary part-cooling fan and no chamber fan[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[7] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | None. 3DJake's table records "Printer display: None" and eufyMake confirms there is no screen[1][2] | 3.5-inch 240x320 touchscreen[3] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Touchscreen plus mobile app and PC app[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi; eufyMake also cites Bluetooth for app pairing[1][2] | 2.4 GHz Wi-Fi only (802.11 b/g/n), Bambu-Bus, microSD card. Ethernet not available[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | None. No camera and no AI recognition on this model[1][2] | Built-in low-frame-rate camera, up to 1080p, timelapse supported[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, PETG and others; eufyMake does not publish a closed list[2] | Suitable: PLA, PETG, TPU, PVA. PLA-CF and PETG-CF suitable only after fitting a hardened-steel nozzle. ABS, ASA, PA, PC and PET are listed as not recommended on the compare page[3][8] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[9] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print precision quoted at +/-0.1 mm (manufacturer specification, not an independent measurement)[1][2] | Not documented |
| Review scores from major outlets (list outlet + score + date) | Not documented | Tom's Hardware: Editor's Choice, rating 4.5 out of 5 in the page's structured data (27 June 2026)[4] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- Bambu Lab A2L Spec Sheet (PDF) store.bblcdn.com · 2026-08 · doc
- Tom's Hardware - Bambu Lab A2L 3D printer review, 27 June 2026 tomshardware.com · 2026-08 · review
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab - Compare all 3D printers (A2L / X2D / H2C columns) bambulab.com · 2026-08 · vendor
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor