3D Printing InfoPrinter comparison
AnkerMake M5 vs UniFormation GKtwo
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5 comparisonsMore UniFormation GKtwo comparisons
| Property | AnkerMake M5BEDSLINGER | UniFormation GKtwoRESIN |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | UniFormation |
| Class | BEDSLINGER | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | UniFormation GKtwo 10.3" 8K Resin Printer[3][4] |
| Street price (USD; dated snapshot per entry) | Not documented | $749.99 on uniformation3d.com but marked Sold out, checked Aug 2026 (the page shows a compare-at price of $0.00, i.e. none set)[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][5][2] | UniFormation lists GKtwo variants by region and bundle (GKtwo ALL, GKtwo ALL UK) rather than by hardware, so the hardware specification is common; what changes is what ships in the box. Not to be confused with the earlier GKone[3] |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 228 x 128 x 245 mm[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 350 x 315 x 455 mm[3][4] |
| Net weight (kg) | Not documented | 20 kg packaged (UniFormation publishes package weight, not net weight)[3][4] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Open-frame MSLA with a UV-blocking cover[3][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | MSLA — photocuring LCD, single Z axis, straight-lift peel[3][4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Not documented |
| Hotend & Nozzle | ||
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | Not documented |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 110/220 V[3][4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named. Slicers: CHITUBOX, the GKtwo slicer, and Lychee. File format STL[3][4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | 5-inch touchscreen (control panel — not the masking LCD, see W1)[3][4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | USB file transfer[3][4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | 402.5-405 nm photopolymer resin. No closed compatibility list published[3][4] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | Printing tolerance +/-0.1 mm for lengths up to 100 mm, +/-0.1% beyond — a manufacturer specification, not an independent measurement[3] |
| Resin & MSLA | ||
| Masking LCD | Not documented | 10.3-inch masking LCD, 7680 x 4320 px (8K), XY pixel pitch 29.6 um (manufacturer specification)[3][4] |
| Light source | Not documented | Photocuring LCD light engine at 402.5-405 nm. UniFormation does not publish the LED count or optical design on this page[3][4] |
| Layer exposure times | Not documented | 2-3 s per layer at 0.05 mm layer height (manufacturer figure — one of the few makers here that states the layer height its exposure figure assumes). Sortable value is the midpoint[3][4] |
| Layer height range | Not documented | 0.03, 0.05 and 0.1 mm (three discrete settings, not a continuous range)[3][4] |
| Resin vat & feeding | Not documented | Resin vat capacity 0.7 kg, with built-in resin heating: UniFormation quotes warming to 95 F (35 C) in 8 minutes from 50 F. No auto-refill and no level sensing published[3][4] |
| Fume extraction | Not documented | Built-in odour filter[3][4] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- UniFormation GKtwo 10.3" 8K resin printer product page uniformation3d.com · 2026-08 · vendor
- UniFormation GKtwo technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor