3D Printing InfoPrinter comparison
AnkerMake M5 vs Sovol Zero
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5 comparisonsMore Sovol Zero comparisons
| Property | AnkerMake M5BEDSLINGER | Sovol ZeroCOREXY |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | Sovol |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | Sovol Zero 3D Printer[3][4] |
| Street price (USD; dated snapshot per entry) | Not documented | $389.00 on sovol3d.com against a $499.00 compare-at price, but marked Sold out, checked Aug 2026. Sovol's own announcement article quotes from $359.00[3][4][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][6][2] | No sibling variants at the time of checking. Sovol positions it against the Voron 0 and Bambu Lab P1P. Note the bed and nozzle limits are higher than the larger SV08 (120 vs 100 °C bed, 350 vs 300 °C nozzle), so SV08 figures must not be carried across[3][5][7] |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 152.4 x 152.4 x 152.5 mm advertised[3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 345 x 420 x 475 mm[3] |
| Frame construction & material | Not documented | Full linear rails on all axes; CoreXY with two motors sharing the moving mass[5] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Fully enclosed[5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | CoreXY[5] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear rails on all axes[5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | 1200 mm/s maximum (manufacturer claim). Sovol's own material acknowledges 700 mm/s as the realistic figure for detailed prints[3][5] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | 40,000 mm/s2 maximum (manufacturer claim)[3][5] |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | <=50 mm3/s (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Planetary-gear direct-drive extruder[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating plate. Brass or hardened-steel nozzles in 0.2/0.4/0.6/0.8/1.0 mm[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed[3][5] |
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass or hardened steel, buyer's choice[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed; Sovol states the bed is AC-heated[3][5] |
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | Double-sided PEI steel plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | Eddy-current scanning combined with pressure (force) sensing — Sovol describes it as an inductive sensor plus force sensor[3][5] |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor fitted; type and location not published[3][5] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616, 1 GB RAM, 8 GB eMMC, 64-bit[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 150 W / 24 V (this is the DC supply; the bed is separately AC-heated per Sovol)[3][5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named on the product page beyond OTA updates and OrcaSlicer support; Sovol markets the machine as open source[3][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 not supported)[3][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | Built-in camera for monitoring; resolution not published[3][5] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Arrives preassembled[5] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[3][5] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- Sovol Zero 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Sovol Zero announcement article (Sovol blog) sovol3d.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor