3D Printing InfoPrinter comparison
AnkerMake M5 vs Sovol SV08 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5 comparisonsMore Sovol SV08 Max comparisons
| Property | AnkerMake M5BEDSLINGER | Sovol SV08 MaxCOREXY |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | Sovol |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | Sovol SV08 Max 3D Printer[3][4] |
| Street price (USD; dated snapshot per entry) | Not documented | $1,099.00 on sovol3d.com against a $1,299.00 compare-at price (15% off), in stock, checked Aug 2026[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][5][2] | Much larger sibling of the SV08. Differences that matter in a spec box: 500x500x500 vs 350x350x345, 50 vs 30 mm3/s, TMC5160 XY drivers vs TMC2209, CAN bus, HDMI output, dual 0.4 mm nozzles in the box, and a separately sold chamber-heating module. A chamber heating module for the SV08 Max is listed at $69[3][6][7][4] |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 500 x 500 x 500 mm advertised[3][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 700 x 710 x 750 mm excluding the spool holder. Shipping cartons: 810 x 820 x 360 mm plus a 775 x 728 x 155 mm enclosure-kit box[3][6] |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame supplied as a kit; Sovol ships it in two cartons, one of which is an enclosure kit[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Enclosure kit shipped with the machine (separate carton). A chamber-heating module is sold separately at $69[3][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | CoreXY[3][6] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Z axis 4 x TMC2209; A axis 1 x TMC5160; B axis 1 x TMC5160. Toolhead communication over CAN bus[3][6] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | 700 mm/s maximum (manufacturer claim)[3][6] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | 40,000 mm/s2 maximum (manufacturer claim)[3][6] |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | 50 mm3/s maximum (manufacturer claim)[3][6] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Direct drive with auxiliary (assisted) filament feeding[3][6] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heater. Two 0.4 mm nozzles supplied as standard; 0.4/0.6/0.8 mm optional[3][6] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=300 °C claimed[3][6] |
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=100 °C claimed[3][6] |
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | Not stated on the SV08 Max page; the SV08 family uses an inductive sensor plus pressure sensor[3] |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament runout detection plus filament tangle/clog detection. Sovol does not describe the tangle or clog mechanism[3][6] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[3][6] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper (3DJake's table renders it as "Clipper"). OrcaSlicer is the supported slicer[3][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | USB, Wi-Fi 2.4 GHz and 5 GHz, HDMI, Ethernet[3][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss resume printing supported; mechanism not published[3][6] |
| Materials Support | ||
| Officially supported filament list | Not documented | 1.75 mm filament; Sovol does not publish a per-material list on this page[3][6] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 Max technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor