3D Printing InfoPrinter comparison
AnkerMake M5 vs QIDI X-Max 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5 comparisonsMore QIDI X-Max 3 comparisons
| Property | AnkerMake M5BEDSLINGER | QIDI X-Max 3COREXY |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | QIDI X-Max 3, listed by QIDI as "Qidi Tech X-Max 3 3D Printer" and in navigation as X-Max3[3][4] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI; the product page carries a discontinuation notice rather than a launch date (checked Aug 2026)[3] |
| Street price (USD; dated snapshot per entry) | Not documented | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock[3][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][6][2] | Same-generation siblings X-Plus 3 (280x280x270, 500 mm/s, 800 W) and X-Smart 3 (175x180x170, no chamber heating, 300 °C, 350 W). All three share the Cortex-A53 1.5 GHz / 1 GB DDR3 / 8 GB eMMC control board, so shared-board specs are not evidence of shared print specs. Replaced by the Max4[4][7][8][9] |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Discontinued and out of production; QIDI directs buyers to the Max4[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 325 x 325 x 315 mm advertised[3][4][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 553 x 553 x 601 mm[4][5] |
| Net weight (kg) | Not documented | 30.2 kg net[4][5] |
| Frame construction & material | Not documented | Enclosed CoreXY chassis, fully assembled from the factory. QIDI does not publish a frame-material breakdown[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Fully enclosed, with a chamber circulation blower and activated-carbon air filter[4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C maximum, independent chamber heating (manufacturer claim)[3][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | CoreXY[4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear optical axis (polished steel rod) of high-strength steel[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Double Z axis[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | <=600 mm/s (manufacturer claim)[3][4][5] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | 20,000 mm/s2 (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | 35 mm3/s extruder flow (manufacturer claim)[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | High-flow direct-drive extruder; QIDI states a 9.5:1 gear ratio for this model[3][4] |
| Gear ratio & drive gear material | Not documented | 9.5:1[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating core. Two interchangeable nozzle-head sets shipped: copper alloy for standard materials, hardened steel for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[3][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed[3][4][5] |
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed[4][5] |
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | Double-sided flexible magnetic plate (QIDI's "HF" plate)[3][4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | Automatic levelling via Klipper adaptive meshing; probe technology not named by QIDI[3] |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament detection fitted; type and location not published[4] |
| Cooling & Air Handling | ||
| Auxiliary part-cooling fan? | Not documented | Additional (auxiliary) cooling fan fitted[4] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Chamber circulation blower with activated-carbon air filter[4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[3][4] |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[4] |
| Total rated power draw | Not documented | 900 W rated[4][5] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper with the Fluidd web console. Fork and version not published[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | 5-inch touchscreen, 800 x 480[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | Wi-Fi (QIDI states 150M 2.4G), Ethernet, USB flash drive[4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | ABS, PLA, PETG, TPU, nylon, carbon fibre, PC[5] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Qidi Tech X-Max 3 FDM 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor