3D Printing InfoPrinter comparison
AnkerMake M5 vs QIDI Max4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
| Property | AnkerMake M5BEDSLINGER | QIDI Max4COREXY |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | QIDI Max4, sold as "Max4 High-Temp 3D Printer"[3][4] |
| Release date (announcement and actual shipping) | Not documented | Not published on QIDI's product page; the machine is listed as the current replacement for the discontinued X-Max 3 (checked Aug 2026)[3][5] |
| Street price (USD; dated snapshot per entry) | Not documented | $1,099.00 standard on us.qidi3d.com against a $1,149.00 compare-at price, checked Aug 2026. Variants: Polar Cooler bundle $1,249.00 (was $1,348.00), Max4 Combo $1,249.00 (was $1,299.00), Combo + Polar Cooler $1,399.00[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][6][2] | Four variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), Combo + Polar Cooler. Direct replacement for the X-Max 3, which it differs from on every headline figure: 390x390x340 vs 325x325x315, 800 vs 600 mm/s, 370 vs 350 °C. Do not carry X-Max 3 specs across[3][5] |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Current large-format flagship as of Aug 2026; QIDI's X-Max 3 page directs buyers here[3][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 390 x 390 x 340 mm advertised[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 558 x 578 x 612 mm[4] |
| Net weight (kg) | Not documented | 46.5 kg net[4] |
| Frame construction & material | Not documented | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Fully enclosed with a 3-in-1 air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent active chamber heating (manufacturer claim), with a 4-pin PWM chamber fan with RPM feedback[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | CoreXY[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | 2 mm lead Z screw with an anti-backlash nut[3] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | FOC closed-loop stepper motors[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | 800 mm/s (manufacturer claim, maximum)[4] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | 30,000 mm/s2 (manufacturer claim, maximum)[4] |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | 40 mm3/s rated flow (manufacturer claim)[4] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaper listed as a feature[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Direct drive, dual hardened-steel gears, 8.9:1 reduction[4] |
| Gear ratio & drive gear material | Not documented | 8.9:1; drive gears hardened steel[4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Multi-metal hotend with a ceramic heater and a 0.4 mm bimetal nozzle; ceramic throat[4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=370 °C claimed[3][4] |
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed on a 390 x 390 mm bed QIDI markets as ultra-uniform (no thermal imaging published)[3][4] |
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | Aluminium plate with silicone heater; double-sided magnetic PEI build plate[4] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | Automatic levelling; probe technology not named by QIDI[4] |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor and filament tangle detection (tangle mechanism not described), plus a filament cutter[4] |
| Multi-material/multi-color capability or official upgrade path | Not documented | QIDI Box multi-colour unit supported; sold bundled as the Max4 Combo[3][4] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Toolhead, model and auxiliary fans are all 4-pin PWM with RPM feedback; mainboard and chamber fans are closed-loop, chamber fan high-power turbo[4] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon[4] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | Not documented | 110 V / 220-240 V AC, 50/60 Hz[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not stated on the product page; QIDI Studio, PrusaSlicer and Orca are the supported slicers[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | 5-inch touchscreen, 480 x 800[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | Wi-Fi, LAN, USB[4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | AI camera with print-failure detection[3][4] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[4] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, ABS, ASA, PETG, TPU, PA, PC, and glass- and carbon-fibre-filled polymers[4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage, lifetime tech guidance, 14-day no-reason return[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Max4 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor