3D Printing InfoPrinter comparison
AnkerMake M5 vs Anycubic Photon Mono M7 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore AnkerMake M5 comparisonsMore Anycubic Photon Mono M7 Max comparisons
| Property | AnkerMake M5BEDSLINGER | Anycubic Photon Mono M7 MaxRESIN |
|---|---|---|
| Identity | ||
| Brand | AnkerMake | Anycubic |
| Class | BEDSLINGER | RESIN |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | AnkerMake M5. AnkerMake has since been rebranded eufyMake, and ankermake.com now redirects to eufymake.com[1][2] | Anycubic Photon Mono M7 Max[3] |
| Street price (USD; dated snapshot per entry) | Not documented | $749 advertised base sale/from price; $899 compare-at, not launch MSRP. Global USD storefront, Other plug/no resin selected; US price, availability, shipping and tax require checkout. Checked 2026-10-17.[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the cheaper M5C, which is smaller (220x220x250 vs 235x235x250), has a higher flow rate (35 vs 24 mm3/s) but no screen, no camera and no AI recognition. The M5's headline 500 mm/s is a high-speed-mode figure; its default is 250 mm/s[1][4][2] | Not documented |
| Market position: superseded? successor announced? | 3DJake lists the M5 as sold out and no longer stocked. The brand has been folded into eufyMake[1][2] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 235 x 235 x 250 mm[1][2] | 298 × 164 × 300 mm (X × Y × Z), advertised 14.7 L; usable volume not independently measured.[3] |
| Net weight (kg) | Not documented | 24 kg (manufacturer specification)[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Dual linear Z rails; manufacturer states 10 µm precision.[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s default; 500 mm/s in high-speed mode (manufacturer figures)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 in high-speed mode (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 24 mm3/s (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder[1] | Not documented |
| Hotend & Nozzle | ||
| Heater cartridge power (W) | 60 W heating block, quoted by AnkerMake as reaching 200 °C[1] | Not documented |
| Heated Bed & Surface | ||
| Bed surface (material, texture, coating), single/double-sided | Scratch-resistant PEI-coated magnetic build plate[1] | Laser-engraved aluminium build plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 7 x 7 levelling; probe technology not named[1] | Four-point manual leveling[3] |
| Mesh grid size (probe point count — firmware evidence) | 49 points (7 x 7)[1] | Not documented |
| Electronics & Power | ||
| PSU (brand, wattage, rail voltage) | Not documented | 180 W power supply (manufacturer specification; not measured consumption)[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch colour LCD touchscreen[1] | 4.3-inch touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB-C[1] | USB and Wi-Fi; store still labels LAN as scheduled, so availability is unverified.[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera with AI recognition and time-lapse[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Assembly kit; AnkerMake quotes about 15 minutes[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Print accuracy quoted at 0.1 mm (manufacturer specification, not an independent measurement)[1] | Not documented |
| Resin & MSLA | ||
| Masking LCD | Not documented | 13.6-inch monochrome 7K masking LCD, 46 × 46 µm XY pixel pitch (manufacturer specification)[3] |
| Light source | Not documented | COB + Fresnel lens + light-uniformity algorithm[3] |
| Light uniformity & intensity | Not documented | 4500 ±10% µW/cm² (manufacturer specification)[3] |
| Vertical print speedmm/h | Not documented | Standard resin: ≤31 mm/h at 0.05 mm layers; ≤63 mm/h at 0.1 mm. High-speed resin: ≤86 mm/h at 0.1 mm. Manufacturer table also labels ≤63 mm/h as maximum; headline figures differ. No independent measurement added.[3] |
| Layer height range | Not documented | 0.01–0.15 mm layer height[3] |
| Release film | Not documented | Improved ACF film (manufacturer description)[3] |
| Resin vat & feeding | Not documented | ≤1.3 L vat, dynamic resin temperature control and auto-fill/recycling support (manufacturer specifications).[3] |
| Fume extraction | Not documented | Optional air purifier; filtration efficacy not independently verified.[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- AnkerMake M5 technical data table 3djake.com · 2026-08 · vendor
- AnkerMake M5C review and spec summary (eufyMake) eufymake.com · 2026-08 · vendor
- Anycubic Photon Mono M7 Max official store: base price and specifications Anycubic · 2026-10-17 · vendor
- AnkerMake M5C technical data table 3djake.com · 2026-08 · vendor